| Customization: | Available |
|---|---|
| Conditions of Use: |
Trailer Type, Marine, Land Use |
| Usage: | Emergency Crew, Standby Unit, Common Units |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The Model DSE720 is an Automatic Mains Failure Control Module.
The module is used to monitor a mains supply and automatically start a standby generator set.
The module also provides indication of operational status and fault conditions, automatically shutting down the genset and indicating failures by means of an LCD display, and appropriate flashing LED on the front panel.
Selected timers and alarms can be altered by the customer from the front panel.
Alterations to the system are made using the 810 interface and a PC.
| Power Supply | 8 to 35 Vdc Continuous |
| Cranking Dropouts: | Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries. |
| Max Current | Operating 180mA at 12V, 190mA at 24V ; Standby 145mA at 12V. 150mA at 24V |
| Mains Sensing Input Range | 35V(L-N) to 277V(L-N) AC (+20%) 50Hz - 60Hz (min 15V AC) |
| Alternator Input Range | 35V(L-N) to 277V(L-N) AC (+20%) 50Hz - 60Hz (min 15V AC) |
| Auxiliary Output: | Solid state 2.4A DC at supply voltage. |
| Fuel/Start Output: | Solid state 3.4A DC at supply voltage |
| Generator C.T. | 5A secondary 0.5VA |
| Operating Temperature Range: | -30 to +70°C |
){kind=link}